I'm getting slide show frame rates at KSBA, I have to disable everything in my control panel just to make it flyable.
#1
Posted 05 May 2014 - 03:13 pm
Intel Core i7-4790 Haswell 4.0 GHz EVGA Z97 Classified EVGA Supernova 850 G2 G.Skill Ripjaws 16GB Western Digital 1TB GeForce GTX 780 Superclock
#2
Posted 05 May 2014 - 04:27 pm
Me too. 6-15 fps at KSBA. By comparison, I purchased another new scenery that came out last Saturday in the state of Colorado that gets 20,40+ FPS for me with same settings.
#3
Posted 05 May 2014 - 05:23 pm
Jackda, will be looking into it.
#4
Posted 05 May 2014 - 05:34 pm
well i need a bit more info like: what your fsx settings are on? what scenery you using? (default, global, megascenery) what aircraft? and rough pc spec.
Its a big airport 80 odd buildings surrounded by loads of autogen housing so i wouldn't be expecting massive frame rates if you got everything maxed out.
#5
Posted 05 May 2014 - 05:45 pm
My settings mirror what you guys recommend. High end PC with HD devoted to FSX. I tested with ORBX walk around guy, PADG EMB 120, neither are frame hogs. When I removed animated people FPS improved to above 10
#6
Posted 05 May 2014 - 05:58 pm
not being rude but what one person classes as high end might be mid range to another so its easier just to say what your settings are on and then there can be no confusion. Also you didn't say what scenery your running as this can make a difference as well i.e. megascenery earth gets much better FPS due to no autogen.
#7
Posted 05 May 2014 - 06:16 pm
Paul, my specs are in my signature... I'm using FTX Global, following the recommended slider settings from the manual. I've tried a couple aircraft, ranging from the default trike up to the A2A Cessna, with the same results. With everything ticked on, I get about 9 frames average, If I turn everything off, I get about 19. Barry, this is my first go around... I even thought it might be a library issue, and checked out Catalina and had almost 40 frames.
Intel Core i7-4790 Haswell 4.0 GHz EVGA Z97 Classified EVGA Supernova 850 G2 G.Skill Ripjaws 16GB Western Digital 1TB GeForce GTX 780 Superclock
#8
Posted 05 May 2014 - 06:38 pm
I am running megascenery Earth CA 2.0, getting 20+ FPS at FSdreamteam KLAX, i7-2600k, 3.40 GHz, 8gb ram, NVIDIA Geforce GTX 580
#9
Posted 05 May 2014 - 06:51 pm
#10
Posted 08 May 2014 - 03:16 am
#11
Posted 08 May 2014 - 07:51 am
yes im going through all the files to try and find what is causing it but it takes a while due to so many objects also i get 15-20 fps with everything on max except water on a similar spec pc to yours.
Will update when i found the bad object.
- sebyh likes this
#12
Posted 09 May 2014 - 12:37 am
How much testing did you guys do? I'm just surprised by the number of errors/performance issues that made it through beta testing. Sceneries always need patches, I know that. But these are all big things that just shouldn't get missed by a quality developer.
I also think you guys need to rethink your pricing strategy. KSBA cost me more than Flightbeam's KDEN, yet quality is night and day. If you're going to be charging those prices, your sceneries are going to have to get back to Catalina quality.
Todd
#13
Posted 09 May 2014 - 11:05 am
Let me ask what FPS you would expect to get at an airport like Santa Barbara? with everything turned on?
also can you disable our airport and tell me what you get at the default version so i can compare to mine.
#14
Posted 09 May 2014 - 11:53 am
Intel Core i7-4790 Haswell 4.0 GHz EVGA Z97 Classified EVGA Supernova 850 G2 G.Skill Ripjaws 16GB Western Digital 1TB GeForce GTX 780 Superclock
#15
Posted 09 May 2014 - 01:16 pm
Bruce,
You can't expect it to match the framerate of a default airport. There are a lot more complex buildings, static aircraft, trees and bushes, and other items to display. Nevertheless, the team have acknowledged the comments from yourself, Todd and others, and are working hard to get things right.
#16
Posted 09 May 2014 - 02:23 pm
Hope this helps
Spec: i7-3770K @4GHz
8Gb RAM
Nvidia 670 2Gb
W7 64bit
fps Global+ ftx mesh cars people clutter A/C
30 Y
14-15 Y Y N N Y
13-14 Y Y N Y Y
9 Y Y Y Y N
10 Y N Y N Y
10 Y N Y Y Y
10 Y Y Y Y Y
10 Y Y Y N Y
Edited by bruce, 11 May 2014 - 06:31 pm.
#17
Posted 09 May 2014 - 02:29 pm
Thanks Bruce that's great, so turning cars on drops your frames by 15! cars and people seem to be the biggest hit for you so i'll start checking them again.
#18
Posted 09 May 2014 - 04:28 pm
Getting 45+fps with my old freeware KSBA: http://fsfiles.org/f...tsimshotsv2/bAm
#19
Posted 09 May 2014 - 04:36 pm
Are you guys running KSBA Santa Barbara with the framerate limited? If so, try setting this to "Unlimited", and see what happens.
#20
Posted 09 May 2014 - 08:26 pm
I've tried both ways with the same result, Chris. Locking the frame rate at 30 or 40 actually saves computer resources on lower end systems. And why can't I expect to match the frame rate of a default airport? You're replacing Microsoft's high polygon objects with custom low polygon counterparts, the frame rates should be better. Just replacing default textures with FTX Global made a difference.
Intel Core i7-4790 Haswell 4.0 GHz EVGA Z97 Classified EVGA Supernova 850 G2 G.Skill Ripjaws 16GB Western Digital 1TB GeForce GTX 780 Superclock
Also tagged with one or more of these keywords: Noted
Noted
Support →
Product Support →
No lights (runway, taxi & general) at EGPEStarted by tjsmith21790 , 04 Jan 2019 Noted |
|
|
||
Noted
Support →
Product Support →
KSBA crashes in P3D4.1Started by Joshsum , 11 Jan 2018 Noted |
|
|
||
Noted
Support →
Compatibility Forum →
Inverness tower transparency issueStarted by RobdeVries , 02 Mar 2015 Noted, FSX, DX10 and 2 more... |
|
|
||
Noted
Support →
Product Support →
Wind sock at KAVXStarted by waynelp , 12 Oct 2014 Noted |
|
|
||
Noted
Support →
Product Support →
SBA JetwaysStarted by tmegowan , 30 May 2014 Noted |
|
|
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users